Supermodel Forum

Hi everybody,
i'm a novice with this emulator.
i made all the settings and tried 2 different roms.
Virtua Fighter 3 goes a little faster, while Virtua Striker 2 is slow.
The frame counter still reports 60.0 fps to me.
What are the system requirements to make the emulator work correctly?
Thanks.

what are your system specs ?

It sounds like you need to increase the emulated PowerPC frequency (this is the main CPU on Sega Model 3). It's set to 50 MHz by default but it's too low for many of the later Step 2.x games.

Go into the Supermodel.ini file and add the line "PowerPCFrequency = 60" and see if that helps. If it's not enough you can increase it further; I haven't tested Virtua Striker 2 so I don't know exactly what it needs.

anchounio wrote:what are your system specs ?

Processor intel J4125 @2.7 ghz
Intel UHD graphics 600
12 GB Ram DDR4
@anchounio thank you