Page 1 of 1

Daytona USA 2, engines too loud, music too low

PostPosted: Wed Mar 21, 2018 3:24 pm
by anchounio
Hi
I've noticed in the last versions of Supermodel3 that the music of the game sounds very low... or maybe the engines are too loud.
Is there any way to adjust this?

Re: Daytona USA 2, engines too loud, music too low

PostPosted: Thu Mar 22, 2018 1:57 am
by Spindizzi
Hi,
you can change volume for music and sound directly in the ini file for each game you want (or in command line)
ie:
[ daytona2 ]
SoundVolume = 60
MusicVolume = 150

command line : (part of the readme.txt)
Option: -music-volume=<v>
-sound-volume=<v>

Description: Specifies the volume of MPEG music produced by the Digital
Sound Board and the audio produced by the sound board in
percent. The default is 100, which is full volume, and the
valid range of <v> is 0 (muted) to 200. See the section on
audio settings for more information.

see also the readme.txt and supermodel web site
http://www.supermodel3.com/AdvancedUsage.html
++

Re: Daytona USA 2, engines too loud, music too low

PostPosted: Fri Mar 23, 2018 2:36 am
by anchounio
Thank you :)

Re: Daytona USA 2, engines too loud, music too low

PostPosted: Fri Mar 23, 2018 5:08 am
by anchounio
I've finally set the Sound Effects to 60, and I haven't touched the music, considering the default is 100


[ dayto2pe ]
SoundVolume = 70


The sound of the engine of the car is still quite loud, but at least the music is appreciable now.
The problem is that the rest of the sounds of the game are too low now.

I consider this must be a bug or something. It didn't happen on older versions. I'm using r685

Re: Daytona USA 2, engines too loud, music too low

PostPosted: Wed May 20, 2020 10:10 am
by IwazaruK7
Thanks, but is there a way to do it through test/service and not .ini? In test/service in "sound" i found music volume set, but not sure for others. There is something about engine there with engine (easy) or "chief", i dont know what it is.