ANALOG Alien Extermination Gun not working with Supermodel

[zarltok]

I have started building a gun only cabinet for my little boy and I have encounter numerous issues along the way. Most of them has been solved over hard sweet. I have purchased a USB analog gun from alien extermination [A-pac] and I have been struggling to get it working with Supermodel or even Model2 emulator. This gun was purchased on aliexpress,

One big problem i cannot figure out is why the gun inputs are detected in the control configuration but wont work ingame. I have tested with L.A machinegun, Jurassic Park and the ocean hunter. No luck.... Somehow jurassic park gets a input signal but barely moves the crosshair which I find odd. Its set on RawInput. The gun is set on Joystick1



InputAnalogJoyLeft = JOY1_XAXIS_NEG
InputAnalogJoyRight = JOY1_XAXIS_POS
InputAnalogJoyUp = JOY1_YAXIS_NEG
InputAnalogJoyDown = JOY1_YAXIS_POS
InputAnalogJoyX = JOY1_XAXIS
InputAnalogJoyY = JOY1_YAXIS
InputAnalogJoyTrigger = JOY1_BUTTON1
InputAnalogJoyEvent = JOY1_BUTTON3
InputAnalogJoyTrigger2 = JOY1_BUTTON2
InputAnalogJoyEvent2 = JOY1_BUTTON4
InputGunLeft = JOY1_XAXIS_NEG,MOUSE_XAXIS
InputGunRight = JOY1_XAXIS_POS,MOUSE_XAXIS
InputGunUp = JOY1_YAXIS_NEG,MOUSE_YAXIS
InputGunDown = JOY1_YAXIS_POS,MOUSE_YAXIS
InputGunX = MOUSE_XAXIS,JOY1_XAXIS
InputGunY = MOUSE_YAXIS,JOY1_YAXIS
InputTrigger = MOUSE_LEFT_BUTTON,JOY1_BUTTON1
InputOffscreen = MOUSE_RIGHT_BUTTON,JOY1_BUTTON2
InputAutoTrigger = 0
InputGunLeft2 = NONE
InputGunRight2 = NONE
InputGunUp2 = NONE
InputGunDown2 = NONE
InputGunX2 = JOY2_XAXIS
InputGunY2 = JOY2_YAXIS
InputTrigger2 = JOY2_BUTTON1
InputOffscreen2 = JOY2_BUTTON2
InputAutoTrigger2 = 0
InputAnalogGunLeft = JOY1_XAXIS_NEG
InputAnalogGunRight = JOY1_XAXIS_POS
InputAnalogGunUp = JOY1_YAXIS_NEG
InputAnalogGunDown = JOY1_YAXIS_POS
InputAnalogGunX = JOY1_XAXIS
InputAnalogGunY = JOY1_YAXIS_INV
InputAnalogTriggerLeft = JOY1_BUTTON1
InputAnalogTriggerRight = JOY1_BUTTON3
InputAnalogGunLeft2 = NONE
InputAnalogGunRight2 = NONE
InputAnalogGunUp2 = NONE
InputAnalogGunDown2 = NONE
InputAnalogGunX2 = MOUSE_XAXIS
InputAnalogGunY2 = MOUSE_YAXIS
InputAnalogTriggerLeft2 = MOUSE_LEFT_BUTTON
InputAnalogTriggerRight2 = MOUSE_RIGHT_BUTTON


The gun is detected by windows and works perfectly with Teknoparrot and Mame arcade 64. I am running out of ideas. If anyone has a solution to this?

[zarltok]

I solved the issue with the gun [not registering properly for supermodel games]
It was actually simple and I was over thinking like usual. The controller was set for the wrong player I only needed to switch the input to player 1....

I also verify if sega model 2 emulator had the same issue with player inputs. Its actually not the case for this emulator. The arcade alien gun wont work for this emulator at all.. anyone has a fix for this?